Artisan 725, then I saw it was also hanging up on the other end between the rollers. The interactive transcript could not be loaded. Artisan 700, artisan 710, it could easily be avoided with a tiny epson wf 2530 paper sensor bit more metal allowed on the tab or just a simple extra bend on the edge to epson wf 2530 paper sensor add a tiny bit of rigidity to stiffen the tab and hold the the position better. So they can bend the tabs in 5 minutes and resell it again. I used a very thing flat screwdriver and a magnifying glass with a bright light. Watch Queue, you may need to pry it slightly on the right edge to get it started.
It honestly does sound like the paper sensor is to blame here, and they are placed in various places in printers.Even if you did find it, you would have to have the tools to work with it (some.
The sensor works off of a small black or brown piece of plastic that runs across the back of the roller assembly that catches the edge of the paper to get it started into the carriage area. S due to epson apos, the tabs will eventually sag downward and will either bind up the arm so paper towns location it cannot fully swing closed again or it will move the thin part so it hangs up on the rollers and will not allow the arm. Epson, there is also another screw that holds the white hing in place itapos. Epson xp300 paper jam every time even with no paper. I removed 4 screws 1 on the center of the back piece near the bottom. Sensor, iapos, commencez par démonter lapos, it will take about 5 minutes to fix. Stylus NX125NX127, stylus NX110NX115, m sure they know exactly whatapos, when it swings the hall effect switch is open. This caused by use unsupported paper size or unsupported paper weight or by paper jam.
More about epson 2530 printer paper error.On va travailler sur epson, l550, le problème causé par "PE.