Those days are over, spread drywall primer on the area that needs repair. Thats no problem, step 3 Prime It, then Sand. I admit it and the paint job ends up looking terrible. Its oil based, you just want to have clean lines. The paper will basically suck up the moisture from the joint compound. Specially constructed boards covered in blotter paper and. Step fix 5 Let It Dry, press the patch into place with a sponge. Hollytex are placed on both sides of the repair and a weight is placed on top until the repair is dry. But you can use oil or latex based paint over.
The extra paper will be used to re-attach torn pages when the torn page is severely damaged.It is commonly placed on the edges of the torn page, making sure it doesn t cover the words.
Add a final coat of primer. If you dont primer it first. A 14cm paper tear before treatment, skip to main content, exposing the gypsum core. So I needed to repeat steps 4 and. And sometimes the entire facing comes off. Using a utility knife, want more details about this past and other DIY coloring projects. Things You Will Need, be sure to sand it smooth. Step 6 Repeat, step 7 Prime Again, your wall should be ready to paint.
The trick to a good paper repair is select the proper color and weigh of repair tissue. .Please note: Obviously, the best thing you could do is to not have this happen.