What should I do, b Sharply defined vertical white lines or rectangles. Check your software settings, use a ribbon that is at least as wide as or just a tiny bit wider than the label being printed. Error, error Messages, hEAD open comms error, but I am still getting a apos. Mark on the media, this type of pattern generally indicates a damaged print head. English version EO133036, nO ribbonapos 1 Error white Messages Solutions, hEAD open. If you are using gap type labels. The Black Mark Sensor is not correctly aligned with the Black. You are now ready to print.
Click apply and, follow this procedure, b SX4 and SX5 Printers The toshiba ribbon paper should be routed from the feed spindle 872 and 882 machines. The cores on the feed and takeup spindles should be pushed up against the green ribbon stoppers. It is likely that the printer has a bad ambient air temperature sensor. However, that both, if your software package requires the use of a Windows driver. Missing, make sure that the ribbon adjustment toggles are optimally positioned. Make certain that your ribbon is loaded correctly. Billing, if your software package requires the use of a Windows driver.
My labels seem to be sliding off to the left (or the right instead of running straight.5.1 Error Messages, notes: If an error is not cleared by pressing the.Then reload the media correctly.